#!/bin/bash

if [ ! "$#" == "3" ]; then
    	echo -e "\nWarning: Wrong command line arguments. \nUsage: ./check_huawei <hostname> <community> <part> <warning> <critical>\n \nParts are:  lunusage, poolusage, poolstatus, cpu, tempsys, hdstatus, psustatus, fanstatus, controller, enclosure, bbustatus, uptime, memuse, traffic, latency and iops\nExample: ./check_huawei 127.0.0.1 public poolusage  10 5\n" && exit "3"
fi
strHostname=$1
strCommunity=$2
strpart=$3
strWarning=$4
strCritical=$5

# Check ob Storage erreichbar ist
TEST=$(snmpstatus -v 1 $strHostname -c "$strCommunity" -t 5 -r 0 2>&1) 
# echo "Test: $TEST"; 
if [ "$TEST" == "Timeout: No Response from $strHostname" ]; then 
echo "CRITICAL: SNMP to $strHostname is not available"; 
exit 2; 
fi

# LUNUSAGE ---------------------------------------------------------------------------------------------------------------------------------------
if [ "$strpart" == "lunusage" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.8.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.8.1.1 |  tr '\n' ' '))
	declare -a capacity=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.8.1.5 | tr '\n' ' '))
	declare -a usedspace=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.8.1.6 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		let "perc=(100-(${usedspace[c]}*100)/${capacity[c]})"
		perfdata="$perfdata LUN${nums[c]}=$perc;$strWarning;$strCritical"
		if [[ ${perc[${c}]} > $strCritical ]]
		then
		status="CRIT"
		crit="$crit LUN ${nums[c]} $perc% free"
		elif [[ ${perc[${c}]} > $strWarning ]]
		then
		status="WARN"
		warn="$warn LUN ${nums[c]} $perc% free"
		else
		status="OK"
		ok="$ok LUN ${nums[c]} $perc% free"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical: $crit |$perfdata"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning: $warn |$perfdata"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK: $ok |$perfdata"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

# Poolusage ----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "poolusage" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.1 |  tr '\n' ' '))
	declare -a capacity=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.7 | tr '\n' ' '))
	declare -a freespace=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.9 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		let used=${capacity[c]}-${freespace[c]}
		let "perc=(100-($used*100)/${capacity[c]})"
		perfdata="$perfdata Pool${ids[c]}=$perc;$strWarning;$strCritical;;;PoolGB${ids[c]}=$used;;;;;"
		if [[ ${perc[${c}]} < $strCritical  ]]
		then
		status="CRIT"
		crit="$crit Pool ${nums[c]} $perc% free"
		elif [[ ${perc[${c}]} < $strWarning  ]]
		then
		status="WARN"
		warn="$warn Pool ${nums[c]} $perc% free"
		else
		status="OK"
		ok="$ok Pool ${nums[c]} $perc% free"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical: $crit |$perfdata"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning: $warn |$perfdata"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK: $ok |$perfdata"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi
# Poolstatus ----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "poolstatus" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.2.1.5 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi


# CPU ----------------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "cpu" ]; then
    	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.21.3.1.1 | tr '\n' ' '))
	declare -a cpu=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.21.3.1.2 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		perfdata="$perfdata CPU${ids[c]}=$cpu;$strWarning;$strCritical"
		if [[ ${cpu[${c}]} > $strCritical  ]]
		then
		status="CRIT"
		crit="$crit CPU${ids[c]} $cpu"
		elif [[ ${cpu[${c}]} > $strWarning  ]]
		then
		status="WARN"
		warn="$warn CPU${ids[c]} $cpu"
		else
		status="OK"
		ok="$ok CPU${ids[c]} $cpu %"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical: $crit% |$perfdata"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning: $warn% |$perfdata"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK: $ok |$perfdata"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

    	
# SYSTEM Temperature---------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "tempsys" ]; then
    	TEMPSYS=$(snmpwalk -t 120 -v 1 -O vqe -c $strCommunity $strHostname  .1.3.6.1.4.1.34774.4.1.23.5.6.1.8)
    	       	strOutput="System Temp=$[TEMPSYS]C|'System Temp C'=$[TEMPSYS]C;$strWarning;$strCritical"

            	if [ $TEMPSYS -ge "$strCritical" ]; then
                    	echo "CRITICAL: "$strOutput
                    	exit 2
            	fi
            	if [ $TEMPSYS -ge "$strWarning" ]; then
                    	echo "WARNING: "$strOutput
                    	exit 1
            	fi
            	echo "OK: "$strOutput
            	exit 0
    	
# HD Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "hdstatus" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname  .1.3.6.1.4.1.34774.4.1.23.5.1.1.4 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname  .1.3.6.1.4.1.34774.4.1.23.5.1.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname  .1.3.6.1.4.1.34774.4.1.23.5.1.1.2 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		crit="$crit DISK${ids[c]} $status"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

# PSU Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "psustatus" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.3.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.3.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.3.1.3 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		crit="$crit PSU${ids[c]} $status"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

# FAN Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "fanstatus" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.4.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.4.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.4.1.3 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		crit="$crit FAN${ids[c]} $status"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi
# Controller Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "controller" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.2.1.5 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.2.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.2.1.2 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		crit="$crit Controller${ids[c]} $status"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

# Enclusure Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "enclosure" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.6.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.6.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.6.1.4 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		crit="$crit Enclosure${ids[c]} $status"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

# BBU Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "bbustatus" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.5.1.2 | tr '\n' ' '))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.5.1.1 |  tr '\n' ' '))
	declare -a status=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.5.1.3 | tr '\n' ' '))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		if [[ ${status[${c}]} != 1 ]]
		then
		status="CRIT"
		crit="$crit BBU${ids[c]} $status"
		elif [[ ${status[${c}]} = 1 ]]
		then
		status="OK"
		else
		status="unknown"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

# Uptime Status----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "uptime" ]; then
    	UPTIME=$(snmpwalk -t 120 -v 1 -O vqet -c $strCommunity $strHostname .1.3.6.1.2.1.1.3.0)
	strOutput=$UPTIME
	seconds=$((UPTIME/100%60))
	minutes=$((UPTIME/100/60%60))
	hours=$((UPTIME/100/60/60%24))
	days=$((UPTIME/100/60/60/24))
	strOutput="$days days, $hours hours, $minutes minutes, $seconds seconds|Uptime=$UPTIME;;;;;"
	echo $strOutput
       	exit 0

# Memory Status---------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "memuse" ]; then
	declare -a nums=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.2.1.5 ))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.2.1.1 | tr '\n' ' '))
    	declare -a memusage=($(snmpwalk -t 120 -v 2c -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.5.2.1.9 ))
	c=0
	if [ "$ids" = "No" ]
	then
	echo "Check not supported"
	exit 0
	else
	for line in ${ids[@]}
		do
		perfdata="$perfdata ${nums[c]}=${memusage[${c}]};$strWarning;$strCritical"
		if [[ ${memusage[${c}]} > $strCritical ]]
		then
		status="CRIT"
		crit="$crit Memory${nums[c]} ${memusage[${c}]} %"
		elif [[ ${memusage[${c}]} > $strWarning ]]
		then
		status="WARN"
		warn="$warn Memory${nums[c]} ${memusage[${c}]} %"
		else
		status="OK"
		ok="$ok ${nums[${c}]} ${memusage[${c}]} %"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical: $crit% |$perfdata"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning: $warn% |$perfdata"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK: $ok |$perfdata"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi
	fi

strOutput="$[MEMUSE]% free|'MEMUSE'=$[MEMUSE]%;$strWarning;$strCritical"
	if [ $MEMUSE -lt "$strCritical" ]; then
           echo "CRITICAL: "$strOutput
       	exit 2
       	fi
       	if [ $MEMUSE -lt "$strWarning" ]; then
       	echo "WARNING: "$strOutput
       	exit 1
       	fi
       	echo "OK: "$strOutput
        exit 0

# IOPS Status ----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "iops" ]; then
	declare -a luns=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.23.4.8.1.2 | tr '\n' ' ' | sed 's/\"/ /g'))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.21.4.1.1 | tr '\n' ' '))
	declare -a ios=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.21.4.1.3 | tr '\n' ' '))
	c=0
	for line in ${ids[@]}
	do
	perfdata="$perfdata ${luns[c]}=${ios[c]};0;0"
	sum=$((sum+${ios[c]}))
	let c++
	done
	echo "IOPS: $sum|All=$sum;0;0 $perfdata"
	exit 0

# Traffic Status ----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "traffic" ]; then
	declare -a luns=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname  .1.3.6.1.4.1.34774.4.1.19.8.12.1.2 | tr '\n' ' ' | sed 's/\"/ /g'))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.21.3.1.1 | tr '\n' ' '))
	declare -a traf=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname .1.3.6.1.4.1.34774.4.1.21.3.1.8 | tr '\n' ' '))
	c=0
	for line in ${ids[@]}
	do
	perfdata="$perfdata ${luns[c]}=${traf[c]};0;0"
	sum=$((sum+${traf[c]}))
	let c++
	done
	echo "Traffic: $sum MB/s|All=$sum;0;0 $perfdata"
	exit 0

# Latencystatus ----------------------------------------------------------------------------------------------------------------------------------------
elif [ "$strpart" == "latency" ]; then
	declare -a luns=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname   .1.3.6.1.4.1.34774.4.1.23.4.8.1.2 | tr '\n' ' ' | sed 's/\"/ /g'))
	declare -a ids=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname  .1.3.6.1.4.1.34774.4.1.21.4.1.1 | tr '\n' ' '))
	declare -a lat=($(snmpwalk -v 2c -t 120 -O vqe -c $strCommunity $strHostname    .1.3.6.1.4.1.34774.4.1.21.4.1.13 | tr '\n' ' '))
	c=0
	for line in ${ids[@]}
		do
		perfdata="$perfdata ${luns[c]}=${lat[c]};$strWarning;$strCritical"
		if [[ ${lat[${c}]} -ge $strCritical  ]]
		then
		status="CRIT"
		crit="$crit ${luns[c]} ${lat[c]}µs"
		elif [[ ${lat[${c}]} -ge $strWarning  ]]
		then
		status="WARN"
		warn="$warn ${luns[c]} ${lat[c]}µs"
		else
		status="OK"
		ok="$ok ${luns[c]} ${lat[c]}µs"
		fi
	let c++
	done
	if [ "$status" == "CRIT" ]
	then
	echo "Critical: $crit|$perfdata"
	exit 2
	elif [ "$status" == "WARN" ]
	then
	echo "Warning: $warn|$perfdata"
	exit 1
	elif [ "$status" == "OK" ]
	then
	echo "OK|$perfdata"
	exit 0
	else
	echo "No Performance Data"
	exit 0
	fi

#----------------------------------------------------------------------------------------------------------------------------------------------------
else
    	echo -e "\nUnknown Part!" && exit "3"
fi
exit 0