Search Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
Directory Tree
Category: Cisco
Nagios plugins for monitoring Cisco routers and switches.
Meet The New Nagios Core Services Platform
Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.
Monitoring Made Magically Better
- Nagios Core on Overdrive
- Powerful Monitoring Dashboards
- Time-Saving Configuration Wizards
- Open Source Powered Monitoring On Steroids
- And So Much More!
Submit Your Nagios Project!
Help build Nagios Exchange for yourself and the entire the Nagios Community by your Nagios project to the site. It's easy - just create an account, login, and add a new listing. Read the FAQ for instructions.Check Admin Up Oper Down
networklore.com/check-admin-up-oper-down/Check Admin Up Oper down uses SNMP to find interfaces which are enabled (no shutdown), but are still operationally down. It then reports an issue and lists the interfaces in the down state.
Check cisco 3750 stack status
www.telecomitalia.smCheck the status of a Cisco Catalyst 3750,3650,3850 stack via SNMP
Check Cisco AP Number
Check the number of AP registered on a Cisco Wireless Controller. If the number of AP isn't what expected, it returns a WARNING state.
Check Cisco ASA Connections
networklore.com/check-asa-connections/The Check Cisco ASA Connections plugin monitors the number of open connections through your firewall and returns a warning or critical state depending on the limits you set. The plugin supports SNMP version 2c and 3. The plugin is part of Nelmon (h ...
Check Cisco ASR BGP
Check ASR1k & ASR9k, BGP state, IPv4/6, prefix count, min/max prefix warnings
Check Cisco ASR CPU
Check Cisco ASR1/9k CPU utilization
Check Cisco ASR Memory
Check Cisco ASR1/9k memory utilization (updated version of check_cisco_ios_mem.pl)
Check Cisco CRC Errors on Switch
Nagios check CRC error on Cisco Switch
Check Cisco FRU Fan
www.boreal-labs.comChecks fan status on a CISCO-ENTITY-FRU-CONTROL-MIB compliant device (Cisco Catalyst switches, routers, ASA, MDS 9000 series, ...).
Check Cisco FRU Module
www.boreal-labs.comChecks module status on a CISCO-ENTITY-FRU-CONTROL-MIB compliant device (Cisco Catalyst swithces, routers, ASA, MDS 9000 series, ...).
Check Cisco HSRP State
abi.renhart.com/index.php/2012/02/20/check-cisco-hsrp-state/Check HSRP State of Cisco Routers
Check Cisco PoE availability (support stacks)
Check the PoE availability of a Cisco switch via SNMP
Check Cisco Snmp
Multiple cisco fonction check Modules/ Environement / sensor / stacks / hsrp / ironport
check cisco stack distributed and standard mode
This is a Nagios plugin: Check the state of the redundant stack ring, switches in the stack ring and stackport status via SNMP. Also check stackport distributed mode. Compatible with all switch 2960s 2960x 2960xr 3750 and 3850 with stack Example o ...
Check Cisco Stack status
Check the state of the redundant stack ring, switches in the stack ring and stackport status via SNMP.
Check Cisco Voice Router
Python script for checking a Cisco Voice Router.
Check Cisco VTP mode via SNMP
Check the VTP mode on a Cisco device. Ok if transparent, warning if client and critical if server.
Check Cisco WLC 5500 Series
Nagios check for WLC 5500 Series Checks AP´s IPadress , Firmware and users New Version with SSID Cannel check_Cisco_WLC.sh -H(hostname) -C(comunity-string) -v(2c) -w(warning) -c(critical)
Check Cisco WLC Access Points
A plugin to monitor the currently associated Access Points on a Cisco Wireless Lan Controller. It throws an 'Critical' alert if an AP is not found, and e-mails you the name of the AP (or AP's) that were not found associated to the WLC. If it finds an AP ...
Check if Cisco config is saved via SNMP
Scripts checks if you saved the running Cisco config to nvram. It does this by comparing the ccmHistoryRunningLastChanged and ccmHistoryRunningLastSaved.
Check Ironport Disk Quota usage
Plugin for monitoring the disk quota usage on ESA (Email Security Appliance) or SMA (Security Management Appliance) Need : ssh connection to ironport (preferred with pubkey) Needed modules : "expect" "awk" "egrep" - check_IronportQuota.sh --help ...
Check PIX Failover Status
Checks status of a pair of PIX firewalls in failover. Allows OK state for any valid status, and can notify on change of status (first change only).
Check SNMP Cisco Traffic
Check Traffic Usage of an Interface on a Cisco Device
Check various hardware environmental sensors
The basic function of this script is to check various hardware environmental sensors, like power supply's, fans, cards, modules etc. Cisco, Nokia, BlueCoat, IronPort, Foundry, Linux, Extreme, Juniper, HP ProCurve, NetScreen, Citrix and Transmode.
check_cisco_aironet_clients
A simple plugin to check connected clients to an Aironet device. Usage: check_cisco_aironet_clients.pl -H -U -P [ -I ] [ -w -c ]
Check_Cisco_Config
github.com/mrpaulmanley/check_cisco_config2013-9-26 - Updated to version .3 This update should make the script work on newer Linux and Unix TFTP servers that require an existing file to exist before accepting an incoming file. The script now touches the file name to create an empty file so that t ...
check_cisco_envmon (YAML)
www.boreal-labs.comIt checks the components hardware status and their functional value levels in CISCO-ENVMON MIB compliant Cisco devices
check_cisco_fan
www.matthieuperrin.net/This is a script to monitor FAN on Cisco Catalyst switches via SNMP.
check_cisco_free_interfaces
Count the number of free interfaces more than X days on a cisco switch
check_cisco_ifs - via SSH or Telnet
This plugin allows monitoring of 1 or more interfaces of Cisco equipments. Supports both SSH and Telnet. It was tested on 4500 switches but should work properly on any IOS based equipment. The plugin will return 0 [OK] if all given I/Fs are up, 1 [WAR ...
check_cisco_ping
Perl based telnet to a Cisco and uses ping, supports vrf routing tags.
check_cisco_power_supply
github.com/fskale/check_cisco_power_supplyIPV6 ready, state of the art Non-Blocking / Async I/O one-flow SNMP Check for all CISCO devices (see details) Using state of the art non-blocking/async IO (EV and Mojolicious) Using DNS Native non-blocking resolver ! IPV6 ready !!! ...
check_cisco_wlc - Cisco WLC Checks
Script I wrote to check the total associations on a WLC as well as total associations per access point on the WLC. Free for any to use and modify. Used and tested on a 4400 series WLC.
check_cisco_wlc.pl
check-cisco-wlc.urandom.atcheck_ironport.pl is a Nagios Plugin, which requests specific parameters via SNMP from a Cisco Ironport Web and Mail Security appliance. Documentation can be found at http://check-cisco-wlc.urandom.at/cgi-bin/index.pl?menu=documentation
Check_Cisco_WLC_Health
pingtraceroute.techCheck Cisco WLC controller health, include cpu, memory, temp
check_cnr
www.kilala.nl/Basic monitor that checks if Cisco Network Registrar (CNR) is up and running.
check_config
alpern.free.fr/spip.php?article416This plugin is use to save config of switch or router. This plugin, is available for devices like Cisco (ios or catos), h3c (3com), Enterasys. This check is write in ruby language. Add SSH support in v0.61
check_ironport.pl
check-ironport.urandom.atcheck_ironport.pl is a Nagios Plugin, which requests specific parameters via SNMP from a Cisco Ironport Web, Mail and Management Security appliance.