Search Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
Directory Tree
Directory
phyo
byphyo, December 2, 2014
Hi,
Which IP Address should use? VIP Address or Primary IP Address?
When I use VIP address, the output as follow.
[root@nagios01 libexec]# ./check_cisco_firewall.sh -V 2c -C public -H 192.168.50.17 -M failover
Unknown - Primary = Down, Secondary = Down | Actives_Nodes=0
[root@nagios01 libexec]#
Thanks.
Which IP Address should use? VIP Address or Primary IP Address?
When I use VIP address, the output as follow.
[root@nagios01 libexec]# ./check_cisco_firewall.sh -V 2c -C public -H 192.168.50.17 -M failover
Unknown - Primary = Down, Secondary = Down | Actives_Nodes=0
[root@nagios01 libexec]#
Thanks.
byphyo, April 14, 2014
I used this to monitor Cisco ASR9010 CPU,memory, fan, temp, etc.
For CPU is ok. But when i monitor memory, the free memory is only 1%. then i contact to network guy. he check from CLI and output shows,
Physical Memory: 6144M total (4120M available)
Application Memory : 5887M (4120M available)
Image: 63M (bootram: 63M)
Reserved: 128M, IOMem: 64K, flashfsys: 0
Total shared window: 41M
Is there anything I need to change for memory?
For Fan, the output show, "Fans: OK - 0 Fans are running all good | total=0 err=0"
For temp, the output show
"[root@nagios01 libexec]# ./check_c4510.pl -H 10.110.40.23 -C nagios -t temp -w 45 -c 55
The switch 10.110.40.23 can't report temperature via SNMP
Syntax Error! "
Let me know what should i change?
Thanks for your plugin.
For CPU is ok. But when i monitor memory, the free memory is only 1%. then i contact to network guy. he check from CLI and output shows,
Physical Memory: 6144M total (4120M available)
Application Memory : 5887M (4120M available)
Image: 63M (bootram: 63M)
Reserved: 128M, IOMem: 64K, flashfsys: 0
Total shared window: 41M
Is there anything I need to change for memory?
For Fan, the output show, "Fans: OK - 0 Fans are running all good | total=0 err=0"
For temp, the output show
"[root@nagios01 libexec]# ./check_c4510.pl -H 10.110.40.23 -C nagios -t temp -w 45 -c 55
The switch 10.110.40.23 can't report temperature via SNMP
Syntax Error! "
Let me know what should i change?
Thanks for your plugin.