Category: HP (Compaq)

Check RAID devices on HP DL320 G5 - windows

A perl-based plugin to check RAID devices on HP DL320 G5 servers running Windows. It requires Hrconf

check_cciss - HP and Compaq Smart Array Hardware status

HP/HPE Smart Array Hardware status plugin for Nagios 1.x/2.x/3.x

check_esxcli_hparray

A Nagios plugin that checks HP Proliant hardware raid via the VMWare ESXCLI tool on ESXi servers with the HP Util Blunde installed (hpacucli namespace enabled). This is based on the check_hparray plugin but with the checking order corrected in order t ...

check_hp

Check CPUs, fans, array controllers, logical / physical drives, temperature and power supplies on your Proliant servers or blade systems through SNMP. As of version 2.20 you can use this plugin to retrieve performance data for Smart Array CPUs.

check_hpacucli

Nagios plugin that checks HP RAID controller status with hpacucli, requires CPAN module Nagios::Plugin & hpacucli to be installed. To work it will need a sudoers line see NOTES in code for details.

check_hparray

Plugin written in Bourne Shell that checks HP Proliant hardware raid via the HPACUCLI tool.

check_hpasm

This plugin monitors the hardware health of HP Proliant Servers, provided that the hpasm (HP Advanced Server Management) software is installed. It is also able to monitor the system health of HP Bladesystems and storage systems.

check_HPBladeSystemTemperature

Plugin (written in PHP) dedicated for Nagios which allows to read ambient mean temperature of HP Blade System.

check_hpIML

check_hpIML allows you to check if everything is OK from IML point of view. It uses hpasmcli from hp-health

check_hp_bladechassis

check_hp_bladechassis is a plugin for Nagios which checks the hardware health of HP blade enclosures via SNMP. The plugin is only tested with the c7000 enclosure.

check_hp_ilo.pl

This is a Nagios plugin, for reporting and checking the normal operation of the ILO port of a HP Server HP (brand) Servers are typically equipped with a management processor, branded 'ILO' (Integrated Lights Out). This provides remote access and allows ...

check_hp_ilo.sh

Bash script, checks and returns status and informations about HP iLOs card (2, 3 and 4 version)

check_hp_ilo4

check for HP ILO4 service processor health

Check_hp_switch_mem.sh

This is a Nagios Plugin that monitors the size (Kb, Mb, Gb) of the total/free/used memory of a HP Procurve Switch. Warning and critical levels (in %) can be set, and plugin gives us perfdata output too, so it can ...

check_http_ilo

The plugin is a rough http scrap to get the text from ilo 100 server monitors. The ilo 100 monitors do not have an snmp engine and pass snmp queries to the local OS. So if your OS does not have the snmp drives running you cannot get the ilo sensor data... ...

check_ilo

Checks the iLO Management Controller of HP Proliant Servers by querying it via XML

check_ilo2_health

Check hardware health of HP Proliant Servers by querying the iLO2/3/4/5 Management Controller.

check_proliant.py

Plugin to check Proliant hardware using only Python and HPASMCLI.

check_smartarray ^Popular

Checks HP Smart Array (CISS) controller using only tools/commands in FreeBSD base (no perl or hpasm required).

check_snmp_hp-hardware.sh

This shell script checks HP/Compaq hardware via SNMP in the most efficient way possible. The plugin requires HP Insight Management Agents/System Management Homepage be installed on the server - the plugin is known to work with Windows and Linux.

check_snmp_hp_fan

This plugin check the thermal and fan state of HP servers running CPQ SNMP extension.

Compaq Smart Array

A plugin to check status of the Disks of an compaq smart array controler.

Compaq-HP Proliant Server and Blade Checks (SNMP)

Check CPUs, fans, array controllers, logical / physical drives, temperature and power supplies on your Proliant servers or blade systems through SNMP.

Compaq-HP Proliant Server and Blade Checks (SNMP)

Nagios check to recursively scan via SNMP on HP BladeSystem the Fan and power supplies. In addition also the overall system status is retrieved.

Compaq-HP Proliant Server Check Plugin

Check status of hardware components using snmp

FreeBSD HP Compaq SmartArray check

Check the status of your SmartArray RAID under FreeBSD

HP Hardware Plugin Check

This plugin checks the status of objects via SNMP and returns OK, WARNING, CRITICAL or UNKNOWN. It includes a plugin and a CGI.

HP Insight Manager Log Checker

HP Insight Manager Log Checker. Checks Status and last entry of the HP Insight Manager Logs from HP Servers. Tested with HP Proliant DL/ML and Blades

HP Insight Manager Log Checker-rewrite

This checks HP Insight Manager logs, using snmp, and alerts on log entries of status Critical, Unknown and Cautious. It is based on check_insight_log.sh - but I ripped out the entire check code - and rewrote to check on the actual status of the log entry ...

HP SIM Monitoring

Two Plugins to check HP Systems Insight Manager Database for SIM health status and SIM event status

HP-Compaq check health

Check plugin for HP hardware with HP's agent installed

hpasmcli temp check

HP DL-360-G4 Servers with HPASMCLI installed on RHES4. RSH hpasmcli and run SHOW TEMP with SYSTEM BD output to Nagios.

Insight Management Agents

Global health check for Compaq/HP servers hardware with a focus on comprehensive but user-friendly output.

Insight Management Logs

Check the status of HP Insight Logs. This is a revision of Frank Baschin' plugin. It presents more helpful information and accurate status codes.

Nagios check to recursively scan via SNMP on HP BladeSy...

In addition to other Nagios checks this script access the "root" OID of the fan and power supplies and iterates for values. In this way, within on Nagios check all values of the installed fans can be retrieved and the worst status determines the overall ...

NRPE script for HP SmartArray checks

PowerShell and Python scripts to check HP SmartArray RAID status on Windows and Linux using HPACUCLI and HPSSACLI. The PowerShell version for Windows is semi-actively developed; the Python version for Windows is languishing!

Powershell NRPE NSClient script for HP SmartArray check

Powershell script to check HP SmartArray RAID status on Windows

SmartArray 5300 Check Status

This plugin check the status of logical array status and return status code

SmartArray P400 Check status

This Plugin check the status of logical array status and return status code

Windows NRPE plugin to check HP SmartArray controllers