Search Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
New ListingsDirectory Tree
check SNMP CPU Load
Current Version
1.3.2
Last Release Date
2012-11-13
Compatible With
- Nagios 3.x
Owner
License
GPL
Hits
169152
Files:
| File | Description |
|---|---|
| check_snmp_load.pl | check_snmp_load.pl |
Meet The New Nagios Core Services Platform
Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.
Monitoring Made Magically Better
- Nagios Core on Overdrive
- Powerful Monitoring Dashboards
- Time-Saving Configuration Wizards
- Open Source Powered Monitoring On Steroids
- And So Much More!
Nov 13, 2012 - Updated Perfdata to allow better use of data for third party software.
Origanaly created by Patrick Proy. Added Cisco ASA5500 Platform.
Performance data output possible.
Script language : Perl
Supported plateforms : Windows, Linux/Unix, AS400, Cisco (routers, ASA, Pix, catalyst), HP Procurve, LinkProof, Blucoat, Nokia, Fortinet, Netscreen, HP-UX.
Requirements : Net-snmp and Perl with module Net::SNMP
Version : 1.3.2
./check_snmp_load.pl -h
SNMP Load & CPU Monitor for Nagios version 1.3.2
GPL licence, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_load.pl [-v] -H -C [-2] | (-l login -x passwd [-X pass -L ,]) [-p ] -w -c -T=[stand|netsl|netsc|as400|cisco|cata|c5500|nsc|fg|bc|nokia|hp|lp|hpux] [-f] [-t ] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=,
: Authentication protocol (md5|sha : default md5)
: Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-w, --warn=INTEGER | INT,INT,INT
1 value check : warning level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-c, --crit=INTEGER | INT,INT,INT
critical level for cpu in percent (on one minute)
1 value check : critical level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-T, --type=stand|netsl|netsc|as400|cisco|cata|c5500|bc|nokia|hp|lp
CPU check :
stand : standard MIBII (works with Windows),
can handle multiple CPU.
netsl : linux load provided by Net SNMP (1,5 & 15 minutes values)
netsc : cpu usage given by net-snmp (100-idle)
as400 : as400 CPU usage
cisco : Cisco CPU usage
cata : Cisco catalyst CPU usage
c5500 : Cisco ASA 5500 CPU usage
nsc : NetScreen CPU usage
fg : Fortigate CPU usage
bc : Bluecoat CPU usage
nokia : Nokia CPU usage
hp : HP procurve switch CPU usage
lp : Linkproof CPU usage
hpux : HP-UX load (1,5 & 15 minutes values)
-f, --perfparse
Perfparse compatible output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Performance data output possible.
Script language : Perl
Supported plateforms : Windows, Linux/Unix, AS400, Cisco (routers, ASA, Pix, catalyst), HP Procurve, LinkProof, Blucoat, Nokia, Fortinet, Netscreen, HP-UX.
Requirements : Net-snmp and Perl with module Net::SNMP
Version : 1.3.2
./check_snmp_load.pl -h
SNMP Load & CPU Monitor for Nagios version 1.3.2
GPL licence, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_load.pl [-v] -H
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=
-P, --port=PORT
SNMP port (Default 161)
-w, --warn=INTEGER | INT,INT,INT
1 value check : warning level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-c, --crit=INTEGER | INT,INT,INT
critical level for cpu in percent (on one minute)
1 value check : critical level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-T, --type=stand|netsl|netsc|as400|cisco|cata|c5500|bc|nokia|hp|lp
CPU check :
stand : standard MIBII (works with Windows),
can handle multiple CPU.
netsl : linux load provided by Net SNMP (1,5 & 15 minutes values)
netsc : cpu usage given by net-snmp (100-idle)
as400 : as400 CPU usage
cisco : Cisco CPU usage
cata : Cisco catalyst CPU usage
c5500 : Cisco ASA 5500 CPU usage
nsc : NetScreen CPU usage
fg : Fortigate CPU usage
bc : Bluecoat CPU usage
nokia : Nokia CPU usage
hp : HP procurve switch CPU usage
lp : Linkproof CPU usage
hpux : HP-UX load (1,5 & 15 minutes values)
-f, --perfparse
Perfparse compatible output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Reviews (5)
byanaumov, March 1, 2016
HP-UX doesn't support this OID: 1.3.6.1.2.1.25.3.3.1
So. we get "ERROR: Description table : Requested table is empty or does not exist."
sysDescr:
HP-UX host B.11.31 U ia64 2230895380
So. we get "ERROR: Description table : Requested table is empty or does not exist."
sysDescr:
HP-UX host B.11.31 U ia64 2230895380
byspicysomtam, August 26, 2015
Overall does the job but perf data does not match Nagios 3.x API specs.
Thus I tweaked it. Also added a -m|-multicpu option to display perf data for each cpu (this is useful if you have a process looping in a core using 100% cpu). If you have once core then it doesn't show cpu0 (cpu0 and cpu_avg would be same).
How can I upload the new version I tweaked?
Thus I tweaked it. Also added a -m|-multicpu option to display perf data for each cpu (this is useful if you have a process looping in a core using 100% cpu). If you have once core then it doesn't show cpu0 (cpu0 and cpu_avg would be same).
How can I upload the new version I tweaked?
byFfeijo, November 13, 2013
Thanks for the beautiful work.
byRedFish, July 2, 2012
If interested let me know as I have no time to maintain a project. If you want to modify the check yourself the OID is .1.3.6.1.4.1.25506.2.6.1.1.1.1.6.65 (1 min CPU usage in %)
byanuff, December 19, 2011
Compiled under CentOS 6 x64 Works absolutely flawlessly.
