Search Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
Directory Tree
Directory
nagiosexchange
check_smstools
Check GSM Modem signal quality and registration status with smstools
check_zaptel
www.uptime.it/mywiki/CheckZaptelpluging to check the status of zaptel devices, mainly used in asterisk pbxs
linkth_check
r00td0wn.net/linkth.htmlCheck your 1-wire sensors via the LinkTH.
Networker Drives
www.net17.de/projekte/nagios/Check Drives in a Type Library with Legato Networker
Steelhead Riverbed status/peer check plugin
code.google.com/p/nagios-riverbedstatus/downloads/listThis plugin checks health status on Steelhead Riverbed devices, verifies that required peers are connected and returns traffic counter values. It is optimised for speed and low traffic usage.
Z3950 plugin
users.ox.ac.uk/~bodl0655/This plugin queries a Z39.50 server and returns the number of results received.
Check Printer via SNMP
Checks the status of a Printer via SNMP. [ Obviously it needs to be a network printer :) ]
check_2300dl
This plugin checks the status of the toner cartages and drum on a Konica Minolta Magicolor 2300DL Networked Color Laser Printer.
check_hp_print
sourceforge.net/projects/check-hp-print/check_hp_print is designed to check the status of Hewlett Packard printers.
check_printer
sourceforge.net/projects/tntnagiosplugin/Plugin to locate networked printers and monitor their toner levels. Must run on a Windows host - use NSCA to submit results to Nagios.
check_samsung_cartridge
www.deneu.com/Check Toner Status for Magenta, Yellow, Cyan and Black.
check_snmp_printer
www.monitoring-solution.de/moso/index.htmlmedium shellscript, wich allows you to check printers via snmp
check_cisco_free_interfaces
Count the number of free interfaces more than X days on a cisco switch
check_cisco_ping
Perl based telnet to a Cisco and uses ping, supports vrf routing tags.
check_cnr
www.kilala.nl/Basic monitor that checks if Cisco Network Registrar (CNR) is up and running.
check_linksys - plugin for checking Linksys networking ...
check_linksys.pl checks Linksys networking hardware via SNMP. It counts ethernet interfaces and reports how many of them are up or down. Also shows the system description and uptime if you want. There's a spec file in the archive if you want to build an R ...
Cisco Switches and routers
Generic snmp v1 plugin to perform checks on any Cisco switches/routers. For exemple checks like Vlan1, Po1, Gi1/0/1, Fa0, ATM0, FastEthernet0/1 etc ...are supported (SNMP package is required)
Linksys WRT-54 GL / DD-WRT SNMP Check
Check CPU and RAM Usage on a Linksys WRT-54 GL running open-source firmware dd-wrt. tested versions: V2.3 SP1, V2.4, V2.4 SP1 note: you have to activate snmp on your dd-wrt !
RTR or SAA For Cisco Routers
These two plugins are used with cisco routers to extract RTR information using snmp.
Uptime of router or switch
A Plugin to check the uptime of a router or switch With Perf out
Cisco IPS Management
This is a plugin to monitor and reset Cisco IPS devices. It makes use of SSH and expect to perform these functions.
check_apcupsd
martintoft.dk/software/check_apcupsd.txtNagios plugin to monitor APC Smart-UPSes using apcupsd.
3Ware Raid Plugin for 32-bit and 64-bit systems
www.harisekhon.com/nagiosThis is a plugin to test the state of 3ware Raid arrays on servers. Works on 32-bit and 64-bit linux servers. Also tells you if your individual disks are not ok. Switches to customize behaviour.
check_nut
www.lucabert.de/myProgram/listPrograms.phpCheck the status of the UPS using NUT (Network UPS Tools).
Adaptec RAID Check by Anchor Systems
Check the health of an Adaptec raid controller using /usr/StorMan/arcconf Checks the following: Logical device status, Controller status, Failed & Degraded drives. If the battery is present: Charging status, Est of charge time left, Charge left %. And rem ...
Generic NUT plugin
This bash scritp plugin reads only a variable from status returned by upsc command. It maybe used when you have only partial hardware compatibility with NUT drivers.
check_3ware with bash
Checks a 3ware raid controller with the tw_cli tool, uses bash.
check_3ware-aw
www.chinetworks.com/Independently developed (from other here, that is) plugin for checking 3ware controller health. Uses the tw_cli utility (3ware array cli).
check_3ware2
www.arda.dhs.org/projects/nagios-plugins/browser/nagios-plugYet another 3ware RAID controller checker
check_3ware_SSH
www.lorientech.com/Modified original check_3ware script to allow monitoring on remote server with SSH.
check_aacraid Adaptec and ICP Controller Monitoring
linux-techblog.de/NRPE-Plugin that checks the states of a Adaptec or ICP Controller via arcconf and a Perl-Wrapper
check_arcconf Adaptec AAC-RAID
A plugins thats checks an ADAPTEC Raid via /usr/StorMan/arcconf . It looks at the error counts from the Disk Devices.
check_areca
code.google.com/p/perlmonkey/A nagios plug-in to check the Areca controllers via the CLI program.
check_dpt
Nagios plugin for DPT I2O RAID controllers you can check with the dptutil
check_gdth
homepages.uni-paderborn.de/odenbach/projects/check_gdth/Nagios module to report the RAID status from the gdth linux kernel module.
check_hparray
Plugin written in Bourne Shell that checks HP Proliant hardware raid via the HPACUCLI tool.
check_hparray-aw
www.chinetworks.com/Checks HP array health (cciss/cpqarray) using hpacucli.
check_hp_sata_raid
www.more-it.net/HP SATA Raid Check for DL320G5 Servers (and others with HP SATA-Raid Controler)
check_i2o_raid
www.ph-freiburg.de/hochschule/zentrale-einrichtungen/zik/check_i2o_raid checks status of adaptec i2o base raid controllers.
check_icp
check_icp checks the status of an ICP SATA RAID controller ICP9047MA.
check_mylexraid
A plugin to check the status of Mylex/LSI 1030 raid controllers